攪拌車的裝置驅動使用及操作注意
為了更好的使用設備進行施工，必要的操作注意事項還是要多去了解的，避免問題的存在出現影響我們的正常使用，下面自上料攪拌車廠家就來為您講講攪拌車的裝置驅動使用及操作注意事項。
In order to better use the equipment for construction, we need to know more about the necessary operating precautions to avoid problems that affect our normal use. Now, the manufacturer of the loading mixer will tell you about the use of the mixer's device drive and the operating precautions.
一旦液壓泵發生故障，可按以下緊急驅動步驟進行驅動：
Once the hydraulic pump fails, it can be driven according to the following emergency drive steps:
a、轉被好緊急驅動軟管（即應急軟管）；
a. Turn the emergency drive hose (emergency hose);
b、將故障車（被驅動車）熄火，卸下液壓馬達上的高壓油管接頭；
b. Turn off the faulty vehicle (driven vehicle) and remove the high-pressure oil pipe connector on the hydraulic motor;
c、將故障車（驅動車）熄火，將其液壓馬達的高壓油管接頭卸下，并與故障車上液壓馬達的對應接頭軟管相連接；
c. Turn off the faulty vehicle (drive vehicle), remove the high-pressure oil pipe connector of its hydraulic motor, and connect it with the corresponding connector hose of the hydraulic motor on the faulty vehicle;
d、發動救援車，將其操縱手柄撥出料位置，故障車內的混凝土即被排出；緊急驅動完畢后，將救援軟管卸下，并恢復兩車原狀
d. Start the rescue truck and turn its operating handle to the discharge position, and the concrete in the faulty truck will be discharged; After the emergency drive, remove the rescue hose and restore the two vehicles to their original state
5、操作是注意幾個要點
5. Operation is to pay attention to several key points
1、在全自動攪拌車作業前需進行檢查，確認轉向、制動、燈光、信號系統靈敏有用，攪拌運輸車滾筒和溜槽無裂紋和嚴重?fù)p傷，攪拌葉片磨損在正常范圍內，底盤和副車架之間的U形螺栓連接良好。
1. Before the operation of the fully automatic mixer truck, it is necessary to check to confirm that the steering, braking, lighting and signal systems are sensitive and useful, the drum and chute of the mixer truck are free of cracks and serious damage, the mixing blades are worn within the normal range, and the U-bolts between the chassis and the subframe are well connected.
2、了解施工要求和現場情況。選擇行車路線和停車地點。
2. Understand the construction requirements and site conditions. Select driving routes and parking places.
3、在社會道路上行駛需遵守交通規則。轉彎半徑應符合使用說明書的要求，時速不大于15km。進站時速不大于5km。
3. Traffic rules must be observed when driving on social roads. The turning radius shall meet the requirements of the user manual, and the speed shall not exceed 15km/h. The speed when entering the station shall not be greater than 5km.
4、作業時，嚴禁用手觸摸旋轉的滾筒和滾輪。
4. During operation, it is forbidden to touch the rotating roller and roller with hands.
5、在全自動攪拌車倒車卸料時，需服從指揮，注意周圍人員，發現異常立即停車。
5. When backing up the automatic mixer for unloading, obey the command, pay attention to the surrounding personnel, and stop immediately in case of any abnormality.
6、嚴禁在高壓線下進行全自動攪拌車清洗作業。
6. It is strictly prohibited to carry out automatic mixer truck cleaning operation under the high-voltage line.
攪拌車的裝置驅動使用及操作注意就講解到這里了，您對此有什么疑惑或者需求可以隨時來我們網站http://ablank.cn進行了解！
This is the end of the note on the use and operation of the mixer drive. If you have any doubts or needs, please visit our website at any time http://ablank.cn Get to know!
