全自動攪拌車廠家的制動器為什么異常運行？
全自動攪拌車是特殊的重型卡車，在攪拌儲罐時具有很高的有效載荷，復雜的路況和較大的慣性離心力，這對全自動攪拌車的制動系統提出了很高的要求。盡管制動系統對于混合器系統非常重要，但確定全自動攪拌車性的首要考慮因素是車輛的制動距離和制動器的熱降解。
The full-automatic mixer truck is a special heavy truck, which has high payload, complex road conditions and large inertial centrifugal force when mixing the storage tank, which puts forward high requirements for the braking system of the full-automatic mixer truck. Although the braking system is very important for the mixer system, the braking distance and thermal degradation of the brake are the primary factors to determine the safety of the automatic mixer.
如果全自動攪拌車廠家的制動系統有問題，駕駛員和乘客也有危險。因此，在駕駛或踩踏制動器時需要注意制動器。
If there is a problem with the brake system of the full-automatic mixer manufacturer, the driver and passengers are also in danger. Therefore, pay attention to the brake when driving or pressing the brake.
1.制動時發出異常聲音
1. Abnormal sound when braking
踩剎車時，剎車系統會產生劇烈的金屬摩擦。這可能是由于剎車片中的異物，剎車盤上的銹蝕等引起的。
When you step on the brake, the brake system will produce severe metal friction. This may be caused by foreign matters in the brake pads and rust on the brake discs.
2，剎車踏板行程變長
2. Brake pedal travel becomes longer
剎車變軟時，您會看到一個筆直的白點。較長的制動行程的原因主要是由于空氣進入制動系統，缺少制動油，可能的泄漏以及制動襯塊的嚴重磨損。
As the brakes soften, you'll see a straight white dot. The reason for the longer brake stroke is mainly due to the air entering the brake system, lack of brake oil, possible leakage and serious wear of brake pads.
3，剎車偏
3. The brake is biased
制動偏差現象不太常見，主要反映了在施加制動時方向盤偏向一側的事實。造成這種現象的原因可能是制動襯塊的偏心磨損和制動缸的問題。
The phenomenon of brake deviation is not very common, which mainly reflects the fact that the steering wheel deviates to one side when braking is applied. The reason for this phenomenon may be the eccentric wear of brake pad and the problem of brake cylinder.
4，剎車變得越來越困難
4. Braking becomes more and more difficult
許多全自動攪拌車都伴隨著增強制動的問題。加強制動器的主要原因是真空助力器失效。剎車不輔助，經常使用剎車。
Many full-automatic mixers are accompanied by the problem of enhanced braking. The main reason to strengthen the brake is the failure of vacuum booster. The brake is not auxiliary, and the brake is often used.
5，剎車回彈
5. Brake rebound
許多全自動攪拌車伙伴都遇到過這種情況，但是當使用制動器時，會出現一種現象，其中上肢會彈回到制動踏板上，這主要是由于制動盤表面的不平整。墊子和鋼環變形。
Many automatic mixer partners have encountered this situation, but when using the brake, there will be a phenomenon, in which the upper limb will bounce back to the brake pedal, which is mainly due to the uneven surface of the brake disc. The cushion and steel ring are deformed.
關于全自動攪拌車廠家制動器異常運行的原因以及辦法了解就是這樣，希望對你有幫助。如想了解更多攪拌車資訊歡迎點擊官網：http://ablank.cn。
This is the reason for the abnormal operation of the brake of the full-automatic mixer manufacturer and the solution. I hope it will help you. For more information about mixer, please click on the official website: http://ablank.cn .
