混凝土自上料攪拌車液壓驅動系統的維護
其實不管是什么設備，如果想要延長其使用壽命，比較好的辦法就是掌握一些保養方法，當然了混凝土自上料攪拌車也不例外，下面混凝土自上料攪拌車廠家來講講攪拌車液壓驅動系統的維護保養吧。
In fact, no matter what the equipment is, if you want to extend its service life, a better way is to master some maintenance methods. Of course, the concrete self loading mixer is no exception. Next, the concrete self loading mixer manufacturer will talk about the maintenance of the hydraulic drive system of the mixer.
液壓系統是攪拌車的核心系統，為保障攪拌車能正常工作，需要在每次混凝土自上料攪拌車發動前檢查油路散熱器和減速機的液壓油位，保障油位指示在視窗范圍內，同時要保障其清潔性，以免塵粒和水分等污染系統液壓油，造成系統不能正常工作或損壞。
The hydraulic system is the core system of the mixer truck. In order to ensure the normal operation of the mixer truck, it is necessary to check the hydraulic oil level of the oil radiator and reducer every time before the concrete is started from the charging mixer truck, to ensure that the oil level indication is within the scope of the window, and at the same time to ensure its cleanliness, so as to prevent dust particles and moisture from polluting the hydraulic oil of the system, causing the system to not work normally or be damaged.
（1）液壓系統壓力應符合使用說明書中的規定，不得隨意調整，液壓油的油質和油量應符合原定要求。
(1) The pressure of the hydraulic system shall comply with the provisions in the user manual and shall not be adjusted at will. The quality and quantity of the hydraulic oil shall meet the original requirements.
（2）混凝土自上料攪拌車裝料前，應先排凈拌筒內殘存的積水和雜物，在運輸過程中要不停地轉動，以防混凝土離析。攪拌車到達工地和卸料之前，應先使拌筒全速以14—18轉/分轉動1—2分鐘，然后再進行反轉卸料，反轉之前，應使攪拌筒停穩不轉。
(2) Before the concrete is loaded from the loading mixer truck, the remaining water and sundries in the mixing drum shall be drained, and the concrete shall be rotated continuously during transportation to prevent concrete segregation. Before the mixer truck arrives at the construction site and discharges materials, the mixing drum shall be rotated at full speed for 1-2 minutes at 14-18 rpm, and then the reverse unloading shall be carried out. Before the reverse rotation, the mixing drum shall be stopped stably.
對于上面我們講述的塑料攪拌車的保養方法，大家有沒有對它有了很好的認識呢？如果大家還有什么不懂的相關知識可以聯系我們http://ablank.cn，我們會為大家進行詳細的解答。
Do you have a good understanding of the maintenance method of the plastic mixer we mentioned above? If you have any related knowledge that you don't understand, you can contact us http://ablank.cn , we will give you detailed answers.
