自上料攪拌車的攪拌箱如何清潔
自上料攪拌車在運輸過程中，混凝土將在短時間內固化成硬塊。因此，每次運輸混凝土后，都須仔細清洗并粘附。那么自上料攪拌車的攪拌箱如何清潔呢？下面自上料攪拌車廠家為您講解。
During the transportation of the self loading mixer truck, the concrete will be solidified into hard blocks in a short time. Therefore, each time the concrete is transported, it must be carefully cleaned and adhered. How to clean the mixing tank of the self feeding mixer? Next, the manufacturer of the loading mixer will explain it to you.
裝載后，用清水沖洗入口，以清潔入口附近的剩余混凝土，以防止運輸后干燥后混凝土吸附在入口上。干燥的混凝土不易清洗。每次運輸混凝土?xí)r，都要用水沖洗進料口，以保持裝載的混凝土入口濕潤。
After loading, wash the inlet with clean water to clean the remaining concrete near the inlet, so as to prevent the concrete from adsorbing on the inlet after drying after transportation. Dry concrete is not easy to clean. Each time the concrete is transported, the feed inlet shall be flushed with water to keep the loaded concrete inlet wet.
在施工現場卸貨后，及時用自帶的清洗水沖洗卸料斜槽，然后向混凝土儲罐中添加一些清潔水，以保證車輛返回時混凝土儲罐緩慢轉動。
After unloading at the construction site, flush the unloading chute with the cleaning water, and then add some clean water to the concrete tank to ensure that the concrete tank rotates slowly when the vehicle returns.
及時將水箱中的混凝土殘?jiān)稍?，以防止混凝土吸附在水箱?nèi)壁上。當它到達攪拌站并重新裝填混凝土?xí)r，先要排掉水箱中的清潔水，然后重復相同的步驟。
The concrete residues in the water tank shall be dried in time to prevent the concrete from being adsorbed on the inner wall of the water tank. When it arrives at the mixing plant and the concrete is reloaded, the clean water in the water tank shall be drained first, and then the same steps shall be repeated.
在將混凝土運輸?shù)焦摅w和進料口時避免混凝土吸附；裝載混凝土?xí)r，請勿懶散，并用清洗水填充車輛隨附的清洗水箱，并始終注意清洗水箱的水位，以免在清洗或進水時沒有水；
Avoid concrete adsorption when transporting concrete to the tank body and feed inlet; When loading concrete, do not be lazy, and fill the water tank attached to the vehicle with cleaning water, and always pay attention to the water level of the water tank, so as to avoid no water when cleaning or entering the water;
在工作時，須仔細清潔油箱本體，進料口，卸料斜槽以及所有輪胎粘附在混凝土上的地方，以確保車輛的整體清潔。
When working, the fuel tank body, feed inlet, discharge chute and all the places where the tires adhere to the concrete must be carefully cleaned to ensure the overall cleanliness of the vehicle.
保持混凝土在混凝土罐中以及混凝土攪拌罐和車輛進出口的清潔，以使自上料攪拌車的使用壽命更長，減少不必要的經濟損失！更多相關內容就來我們網站http://ablank.cn咨詢吧！
Keep the concrete in the concrete tank and the inlet and outlet of the concrete mixing tank and vehicle clean, so as to make the service life of the self loading mixer longer and reduce unnecessary economic losses! More relevant content will come to our website http://ablank.cn Consult!
下一篇：自上料攪拌車的使用能干什么上一篇：攪拌車上油泥多了可不是什么好事
