大型混凝土攪拌機簡述如何選購攪拌葉片？
混凝土攪拌機，JS攪拌機的攪拌葉片很重要！JS攪拌機通過攪拌筒內的攪拌軸帶動攪拌葉片轉動，從而完成對混凝土的強制攪拌，攪拌葉片的好壞直接影響到混凝土的攪拌效率與質量。混凝土攪拌機在選購時，怎么判斷攪拌葉片的好壞呢？
Concrete mixer, JS mixer mixing blade is very important! JS mixer drives the mixing blade to rotate through the mixing shaft in the mixing drum, so as to complete the forced mixing of concrete. The quality of the mixing blade directly affects the mixing efficiency and quality of concrete. Concrete mixer in the purchase, how to judge the quality of mixing blade?
一、看材質。JS攪拌機攪拌葉片磨損的速度與其使用的材質密切相關。一般來說，用廢舊鋼鐵、邊角料鑄造而成的攪拌葉片，雜質多，使用壽命短，但較便宜；而采用優良鋼板制作而成的攪拌葉片耐磨性更好，使用壽命長，相對較貴。像方泰生產的JS攪拌機的攪拌葉片都是由完整鋼板切割而成，當然攪拌效果更好。
1、 Look at the material. The wear rate of JS mixer blade is closely related to the material used. Generally speaking, the mixing blade made of waste steel and scrap has many impurities and short service life, but the price is cheaper; the mixing blade made of excellent steel plate has better wear resistance, long service life and relatively expensive price. For example, the mixing blades of JS blender produced by Fangtai are all cut from complete steel plate, of course, the mixing effect is better.
二、看加工。JS攪拌機攪拌葉片表面的加工質量決定了其使用時間的長短。如果只是簡單的鑄造打磨，攪拌葉片表面會粗糙不均勻，使用時容易斷裂；假如通過生產線對攪拌葉片表面進行加工處理，生產出來的攪拌葉片材質就會很均勻，表面順滑，使用壽命也較長。
2、 Look at the processing. The processing quality of JS mixer blade surface determines its service time. If only simple casting and grinding, the surface of mixing blade will be rough and uneven, and easy to break when using; if the surface of mixing blade is processed through professional production line, the material of mixing blade produced will be very uniform, the surface will be smooth, and the service life will be long.
混凝土攪拌機，JS攪拌機的使用時間長，而攪拌葉片又是主要的易磨損配件，所以提醒廣大用戶在選購過程中一定要細心觀察攪拌葉片的材質和表面加工質量，一些大廠家均有自己的配件生產線，用戶也可以親自去參觀一下。
Concrete mixers and JS mixers have been used for a long time, and the mixing blades are the main parts that are easy to wear. Therefore, we remind the majority of users to carefully observe the material and surface processing quality of mixing blades in the purchase process. Some large manufacturers have their own parts production lines, and users can also visit them in person.
